Quick Help

1. Turn On

Press Power.
Wait 5 seconds for calibration.

2. Start Detecting

Sweep coil side‑to‑side, close & parallel to the ground.
Coil only detects while moving.

3. Identify Targets

Beep + Target ID (0–99) on screen.
Depth Gauge shows approximate depth.

4. Pinpoint

Hold Pinpoint to locate exact target position.
Sweep slowly for the loudest signal.

5. Adjust Sensitivity

Press Sensitivity to enable → adjust with + / –.
Choose the highest stable level (5 levels).

6. Search Modes

Press Search Mode to cycle:

All Metal (detects everything)
Custom (enable/disable groups)
Jewelry (ignores iron)
Learn (learns one specific target)

7. Batteries

Uses 2× 9V, replace both at the same time.